A Guide To Changing Roof Shingles
When it comes to changing roof materials you don’t have to be a professional, however there are a some things that you need to know before you begin.
Initially, you have to install a starter strip which is essentially a backing for the initial visible row of shingles and which has a primary function of preventing water from getting through to the roof at the gaps in between the tiles. You could utilize pre-cut starter strips, but you could also trim the tabs off a whole tile.
There are a couple of styles and dimensions of these roof shingles that you can choose from and so it truly all depends upon exactly what form of roofing system you’re working. You wish to begin everything off by clearing out the roofing. Your shingles are not going to stick correctly if there is a great deal of dust on the roof. Now you intend to begin shingling. Loosen the glue under the old roof shingles and also eliminate it, and then placed an extra roof shingles in its location to properly go through with replacing roof tiles.
To reseal all the tiles, you have to raise each tab and apply 1″ size place of roof shingles cement beneath each tab. Repeat the nailing as well as cement treatment, and remember that you just have to take care of the ones that are damaged yet if you have the money available, as well as you should do the most effective task and also have it look the most effective it can, you may wish to do the entire roof over once again. This is most likely the most effective suggestion anyhow if your dwelling is older and also hasn’t been re-shingled in a while considering that then you’re simply going to wind up saving money and time down the line by finishing the job.